ENGINEERING DESIGN

ENGINEERING DESIGN

Our experts are having extensive technical expertise and capable to deliver services right from Scoping study, Pre-feasibility study, Concept/Feasibility study/Pre-FEED to Front End Engineering Design (FEED)/Front End Loading (FEL)/Basic Engineering and Detailed Engineering/Design. 

Following are list of disciplines and it’s associated deliverables/activities. Any of the following discipline may prepare scoping study, pre-feasibility study & feasibility study as their deliverable:

• Process: PFD, UFD, Process Simulation, H&MB, P&ID, PSFS, USFS, Safe Charts, Process Design Basis, System Hydraulics, Equipment Sizing/Rating, RV Calculations, Survey/Advices, Key Reports/Studies, Steady State& Transient Analysis, Philosophy documents, Narratives/Memorandum, Lists/Schedules, Datasheets, Design Review, HAZID, HAZOP, SIL/IPF, Operating Manuals etc.
• Loss Prevention: Fire water System Design, Sprinkler/Spray System Design, Foam System Design, Rim Seal System Design, Transient and Surge Analysis, Specifications, Vendor Document Review & approval, TBE etc.
• Piping: Overall Plot Plan, Unit Plot Plan, Equipment layout- Section & Elevation, GA Drawings, Isometrics, 3D Modeling, Datasheets, Piping Material Specifications, Valve Specifications, MTO, Stress Analysis etc.
• Mechanical-Static, Package & Rotating: Static & Rotary Equipment Design, Thermal Design, Mechanical Datasheets, Fabrication Drawings, Static, Package & Rotary Equipment Specifications, Vendor Document Review & approval, TBE etc.
• Pipeline: Preliminary Route Survey, Pipeline Route Map, Detailed Route Survey & Alignment Drawings, Specifications, BOM etc.
• Control & Automation (Instrumentation): C&E, Instrument Layout Drawings, Hook-Up Drawings, Instrumentation & Control Philosophy, Instrument Summary, I/O Count, Alarms and Trip List, Datasheets, Specifications, BOQ, Process Logic for DCS/PLC, Control Logic Diagrams, Vendor Document Review & approval, TBE etc.
• Electrical: Single Line Diagram (SLD), Control Schematic Diagram, Specification for Electrical Items such as Transformer, H.T. Breaker, PCC, MCC etc, Power, Lighting &Earthing Layout Design & Drawing, Design Lighting Protection & Fire Alarm System, Material Take Off, Vendor Document Review & approval, TBE etc.
• Civil, Structural and Architectural: Architectural Drawings for Statutory Approval, Architectural Drawings for Working,Structural Analysis using software, Structural Member sizing, Foundation Design, Wind/Seismic Load Analysis, Material Specifications, FEA etc.
• Telecommunication & IT: Plant security and safety system design like CCTV / PAGA / PABX/GPS, Navigation aids systems like UHF / VHF Radio,Transmission/Microwave/Radar/Trunked Radio/Conventional/Satellite Radio Communication/LAN/WAN/IP systems, Specifications, Datasheets, Vendor Document Review & approval, TBE etc.
• HVAC: Electrical Loa Design Calculations for Heat Loads, HVAC Zoning Layout, Air Flow Diagram, Air Leak Diagram (Air Balance), Detailed Ducting Layouts & Supports, Preparation of Specification & BOQ for HVAC System & Dust Collection System, Vendor Document Review & approval, TBE etc.